PRODUCT

REQUEST QUOTATION
– – – – – – – – – – – – – – – – – – – – – – – – – – – – –
We balance fire protection design and standards to absolute completion of projects on time and within budget.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – 
 
• SIEX-HC™ 227 (FM-200)
Is known for its versatility in protecting the widest range of hazards and for its combination of efficiency, safety and low cost. It works by total flooding, with a very rapid discharge in less than 10 seconds. The SIEX-HC™ clean agent systems offer the highest efficiency for the most diverse hazard areas. All components, from the cylinder banks to the nozzles, are developed to the highest quality assurance standards.
 
• SIEX-NC™ 1230 (NOVEC 1230)
Stands out for its outstanding suppression power by ensuring efficient liquid agent distribution throughout the protected hazard. The equipment is optimized to work with the NOVEC™ 1230 clean agent. Known as “liquid that doesn’t wet”, this extinguishing agent far exceeds the benefits of water since it does not damage equipment and evaporates easily.
  • UL/FM APPROVED
  • VDS Approved
  • Halon 1301 replacement
  • safe for people and the environment
FM200 System with Selector Valve
Suppression Control Panel
 
SAFETY DEVICES
Other components may be added to the system to increase the safety of personnel in the discharge areas:
PNEUMATIC DELAYS, PNEUMATIC SIRENS, RELIEF VALVES, DECOMPRESSION VALVES, INLINE CHECK VALVES AND ODORIZERS.
For the petrochemical industry, SIEX-HC™ 227 features EXPLOSION-PROOF components.
Siex CO2
CO2 with Pilot Cylinder
Inert-Siex System
• SIEX-CO2 SYSTEM
CO2 is most likely the gaseous extinguishing agent that has the greatest number of installations worldwide. Its accumulated experience facilitates the engineering of a huge number of applications which have become standard, such as electrical generators, transformer stations, etc.
• HIGH PRESSURE SYSTEM
• LOW PRESSURE SYSTEM
 
• INERT-SIEX™ SYSTEM
Clean agent systems are made up of gases found in the atmosphere, and so are completely environmentally friendly. INERT SIEX systems use the full range of extinguishing agents. This makes it easier to adjust the design fully to the needs of our customers.
• IG-541 = 40% ARGON 52% NITROGEN 8% CO2
• IG-55   = 50% ARGON 50% NITROGEN
• IG-100 = 100% NITROGEN
• IG-01   = 100% ARGON
  • UL/FM APPROVED
  • VDS Approved
  • Halon 1301 replacement
  • safe for people and the environment
 SELECTOR VALVES
They help optimize the cost of installation in cases where it is necessary to protect two or more independent hazards, by enabling simultaneous protection with a single unit.
BACKUP SYSTEM
Very recommended option in critical, high-value facilities and/or which include selector valves. Backup systems ensure uninterrupted protection during maintenance or refilling of the main system, leaving the firefighting system on standby to address new threats.
Suppression Control Panel
FM200 System with Selector Valve
• SIEX-HC™ 227 (FM-200)
Is known for its versatility in protecting the widest range of hazards and for its combination of efficiency, safety and low cost. It works by total flooding, with a very rapid discharge in less than 10 seconds.
 
• SIEX-NC™ 1230 (NOVEC 1230)
Stands out for its outstanding suppression power by ensuring efficient liquid agent distribution throughout the protected hazard. The equipment is optimized to work with the NOVECTM 1230 clean agent. Known as “liquid that doesn’t wet”, this extinguishing agent far exceeds the benefits of water since it does not damage equipment and evaporates easily.
  • UL/FM APPROVED
  • VDS Approved
  • Halon 1301 replacement
  • safe for people and the environment
Siex CO2
CO2 with Pilot Cylinder
Inert-Siex System
• SIEX-CO2 SYSTEM
CO2 is most likely the gaseous extinguishing agent that has the greatest number of installations worldwide. Its accumulated experience facilitates the engineering of a huge number of applications which have become standard, such as electrical generators, transformer stations, etc.
• HIGH PRESSURE SYSTEM
• LOW PRESSURE SYSTEM
 
• INERT-SIEX™ SYSTEM
Clean agent systems are made up of gases found in the atmosphere, and so are completely environmentally friendly. INERT SIEX systems use the full range of extinguishing agents. This makes it easier to adjust the design fully to the needs of our customers.
• IG-541 = 40% ARGON 52% NITROGEN 8% CO2
• IG-55   = 50% ARGON 50% NITROGEN
• IG-100 = 100% NITROGEN
• IG-01   = 100% ARGON
  • UL/FM APPROVED
  • VDS Approved
  • VErsitile fire protection system
  • safe for people and the environment
First Option experience also extends outside the coverage of gas suppression system,
we also offers supply and installation works for; 
FIRE ALARM & DETECTION
FDAS are designed to detect signs of fire in their early development for safe evacuation of occupants.
Early detection also plays a significant role in protecting the safety of emergency response personnel and reduced property loss.
Most alarm systems provide information to emergency responders on the location of the fire, speeding the process of fire control.
  • AVAILABLE SYSTEM;
  • Addressable System
  • Conventional System
  • Air Sampling System
  • Linear Detection System
  • Beam Detectors
PRODUCT BROCHURES:
WATER BASED SUPPRESSION SYSTEM
Water based suppression systems is the most commonly used fire suppression system, It utilize the inexpensive and readily available medium of water to discharge onto flames through a fixed piping system. 
Fire sprinkler systems are standard equipment in most schools, hotels, apartment buildings, warehouses, and other industrial and commercial sites. 
  • AVAILABLE SYSTEM;
  • Fire Sprinkler System
  • Water Mist System
  • Deluge System
  • Foam System
  • Fire Hose Cabinet and Hydrant
  • Kitchen Hood Fire Suppression System
REQUEST QUOTATION
– – – – – – – – – – – – – – – – – – – – – – – – – – – – –
We balance fire protection design and standards to absolute completion of projects on time and within budget.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – –